Bennett Trim tabs.

[Import Manager]

#0, Bennett Trim tabs.
Posted by noquestion25 on May-02-03 at 05:00 PM

Has anyone had probs with there trim tabs. I have the bennett trim tabs and it seems as though they have problems retracting as well as going down one one side only. Cleaned all the connections really well. Did not seem to make a differance. Do the switches go bad I have the toggle style. If anyone has some ideas let me know.
Thanks
(No Question) Josh

--------------------------------------------------------------------------------
#1, RE: Bennett Trim tabs.
Posted by NoSlack on May-02-03 at 06:11 PM
In response to message #0

The wire color code is
Red Port valve
Green Sarboard Valve
Blue Pump Pressure
Yellow Pump Retract
Black Ground
Test functions
+ to blue and red Port side down
+ to blue and green Starboard side down
+ to blue/red/green Both down
+ to yellow & red Port side up
+ to yellow & green Starboard side up
+ to yellow/red/green Both up

You can do these test by disconnecting the wiring plug at the pump and use a jumper wire from a hot source. This should tell you if the pump or one of the valves is the problem.

Bennett has a very good trade in program if all else fails.

Mike