Shaft grease

[Honeygirl]

Works great doesnt turn or wash off
http://i177.photobucket.com/albums/w201/honeygirl26/DSC01616-1.jpg

[NoSlack]

http://i177.photobucket.com/albums/w201/honeygirl26/Boat%20shit/DSC01616.jpg

[NoSlack]

Just pulled my props for the second time after switching to Mobil AW2 grease on the shafts. Went about 75 hours between maintenance intervals and the props slid right off. I use the same grease at work for all the electric motor bearing so I thought I would give it a try on the props, sense nothing else worked for me.

Mike

http://www.dragosupply.com/files/3/categories/15/63/img_D5475100.jpg

[DOGHOUSE26]

That blue trailer bearing grease didn't work for you? I did my old 571DP gas props with it and after 5 years in storage the props came off just fine, just tapped them and off they came. I will admit I never go cheap with the amount of grease on the splines though.

[NoSlack]

I don't think I ever tried the one Joe uses. I tried a couple different marine greases and they all turned to concrete after 50 hours.

Mike

[IRish Wake]

Mike,sent you an E-mail re:my floscan.Did you get it? kev

[NoSlack]

Didn't get any email.

Mike

[IRish Wake]

Mike,did a pm,I think.Let me know if it worked. kevin

[NoSlack]

Nothing in the in box as of noon. Sent you a PM with my number

Mike

[Honeygirl]

I used the blue bearing grease and as mike stated it tured hard on me. I now use the triple guard and ever 100 hours I pull the boat and the grease is as I just put it on. The vovlo tec is the guy who told me to use it.