Raw water pump 41B?

[Sleigher1]

Hi All,
I rebuilt the raw water pump on my 41A a few years ago with Volvo parts.
I seem to remember that the pump was a Jabsco and there was a Jabsco kit that would have done the same job for a lot less $.
Does anybody have the information on that kit?

Thanks,

Peter

[DOGHOUSE26]

Mike would know, but I think it's a Johnson Pump and it was cheaper for me to buy the whole pump brand new on my 41P

[Sleigher1]

Thanks,
I did some research and it does look like a Johnson Pump.
So far the best I can find is a major rebuild kit for about $160.
The pump is just leaking a little bit.
I'm thinking that maybe I can get away with just a new seal or two.
Still open for advice.

P

[NoSlack]

If your Volvo pump number is 831178, 838314, 842843 you have a Johnson F7B-9 series pump.

Your Johnson Seal number would be 05-29-105. You need 2 @ $22-$25 each

Take a look at the parts break down at http://www.pumpvendor.com/media/johnson/pdf/10-24061_series.pdf

Zack, chime in here. I did a couple pumps for him this year for his 42 and I think they are the same model. He will have all the part numbers and best place to get them.

Mike

EDIT: With a 2 seal setup you might get lucky and catch the leak before it gets on the bearings. If you do the bearings, take accurate measurements of how much shaft sticks out past the bearings and re-assemble to the same measurement. If you have any questions, call before you start the job.

[fireescape]

Peter,

I have a pump that Mike and I rebuilt. you are more than welcome to come get it to get you going quick. I ordered all my parts through Marine parts express. Give me a call if you need it 760)802-6481 zack

[Sleigher1]

Well, according to Marine Parts Express
"one list" I have either 858469 or 3583115 both cost the same and both use a rebuild kit # 877373.
The information from below is what I found. Oddly enough they want more for the entire pump than Marine Parts Express.
I'm in no great hurry to get going. I've been working on the boat for almost two years another week or so won't matter.
I'll pull the seals and take them to a seal/o-ring place nearby to match them up. If they don't have them I'll try the other route.
Thanks again, you guys rock!

This is from Pump Agents .com
Model # 10-24277-3
Johnson Pumps

FEATURES
Pump Body: Bronze
Impeller: Neoprene
APPLICATIONS
Volvo Engines TAMD 31-41A, TAMD 31-41B, MD 31-31A, AQD 40-41A, AQD 40-41A
Volvo Pump # 858469, 858470

Available Model # 10-24277-3
Model # Description Price / ea. ORDER CAN SHIP
10-24277-3

Click here for Parts

download_icon Datasheet Johnson Pumps Series # F7B-9. (Volvo Pump # 858469, 858470). $ 690.88 Qty. Same Day
(18 in stock)


Parts and Accessories for Johnson model 10-24277-3
Model # Description Price / ea. ORDER CAN SHIP
Major Overhaul Kit / Rebuild Kit :
10-24277-3MJK Catalog # 10-24277-3MJK, Major Repair kit for Johnson Pump # 10-24277-3. Includes the following parts : (1) IMPELLER 1028B, (6) SCREW 05-04-550 , (1) PLASTIC SPACER 01-45181, (1) O"RING 05-06-501, (1) RET RING 05-34-130, (1) CAM 01-42679, (1) SCREW 05-04-144, (2) BALL BEARING 05-08-128 , (1) ENDCOVER 01-42441, (2) SEAL LIP 16 28 7 SP2700-1027. $ 151.50 Qty. 5-7 Days
(0 in stock)
Minor Service Kit :
10-24277MNK Catalog # 10-24277MNK, Minor Repair kit for Johnson Pump # 10-24277. Includes the following parts : (1) IMPELLER 1028B, (1) SEAL LIP 16 28 7 SP2700-1027. $ 35.53

[Sleigher1]

How about $3.99?
The specs are MOS-01602807-TC 016x28x7mm TC

The Volvo seal is only $7.00 which took some wind out of my sail but the ones from Johnson or pump vendor are like you said $20-30.

Thanks for the help.

P