Fuel Sending Unit

[Royal Hook]

After doing a self fuel polishing of my remaining fuel in my tank, I plan on replacing my fuel sending unit and want to go with the puck type and not the swing arm model. Anyone out there have any ideas which is the manufacture to go with?
Mike

[NoSlack]

Go with a WEMA sending unit. measure the tank depth, deduct 1/2" and that's the size you need I think I installed a 12" sender. Order straight from WEMA or call A to Z Marine Services, 1214 Rosecrans Street, San Diego, California 92106
tel: (619) 224 1606 to see if they have it on the shelf. Same price as ordering it if I remember correctly.

Mike

http://www.wemausa.com/imagesnew/homePageBody900ImageMapped.jpg

[Royal Hook]

Tks. Mike
I was wondering if that was the unit to go with.
I called down to A-Z and they do have the 12" & 14" models for $46. My tank is 14" so I think I'll go online and get the 13.5" to be a little more accurate.
Tks.

[NoSlack]

The tube has 10 segments of different resistance values from 32 ohms(full) to 240 ohms(empty). The float switches in a different resistor ever 1/10 of a tank. From now on you will see the gauge make jumps of a 1/10 of a tank at a time.

Mike

Mike