Has anyone had the trim around the hull and flybridge either painted or redone any other way? I have a 91 billfisher and the stripe is fading away.
any help will be appreciated. also have any of you had any work done by driscolls in mission bay?
Printable View
Has anyone had the trim around the hull and flybridge either painted or redone any other way? I have a 91 billfisher and the stripe is fading away.
any help will be appreciated. also have any of you had any work done by driscolls in mission bay?
I re-striped my boat 4 or 5 years ago with pin stripping I bought from an automotive paint supplier.
My hull stripes are 1 3/8" blue on the bottom, 3/8" white, 3/8" blue and an 1 3/8" white on the top. The flybridge also has a 3/8" stripe around it.
The paint shop ordered a 2" wide roll of each color and had it cut to the widths I needed by their supplier.
4 or 5 years later most of it looks as good as it did the day I put it on. The front of the flybridge were the sun beats most of the day, has some areas that look like a clear coat is bubbling on the tape.
My only suggestion would be, do a little research and see if there are better grades of tape to use for the marine application.
Mike
Welcome Nalani, I had Blackman Raise the water line 2 inches last year, including a re-stripe of the hull and flybridge. They used vinyl and it looks great. Good luck.
?